Step 8: Coding with VAG-COM
Now connect the battery pole and put the car forward. There will be several errors, do not panic. Put the car in the wild and open the vcds.
Function Coming - Leaving Home
Through this automation, the lights are turned on for an X desired interval when you unlock the car in low light conditions and it is also possible to open the lights for a desired Y interval when you lock the car to safely move away.
Now go to 09-Cent. Elect. and activate the bits 5,6,7:
> 
Then the corresponding options will be displayed on the FIS screen in front of the driver's wheel and you can choose more settings from there.
Auto sunroof and windows closure in the event of rain (Rain Closure)
Through this automation, it is possible to automatically close windows and the sunroof in case the rain sensor detects drops of water. Also, the windows and sunroof are closed after 24 hours that will be open regardless of whether rain is detected or not.
The function is activated only by locking the car and after 2 minutes.
From the main menu of modules select 09 Cent. Elect. and after the list that appears, select the Rain Light Sensor (RLS).
There you check the bits 1-2 and uncheck the bit5.
Bits 3-4 refer to the sensitivity of the lights. In normal mode, they will automatically switch on in the tunnel, in low visibility conditions and of course at night. If you are not satisfied, you can choose more sensitivity, so the lights even turn to cloudy.
Then in bytes 2 and 3 you make choices depending on our car, the type of windscreen and the version of the sensor.
In this guide, the windshield has green glass and the sensor has an AH ending.
You have now turned on the function. What's left is to enable the MFD menu to enable or disable the function at will.
From the main menu, select the 46 Cent module. Conv> Coding - 07> Long Coding Helper.
Byte 09 we select bit1.
This will display an option on the FIS screen to enable / disable the function.
